How long does the HGM calcium carbonate mill wear parts last?

Posted: 2019-05-27

• The main motor of the HGM series calcium carbonate grinding mill drives the rotation of each turntable of the main shaft through the transmission mode of the reducer. The turntable drives dozens of ring rollers to roll and rotate in the grinding ring roller through the pin. The raw material passes through the electromagnetic vibrating feeder. The material is evenly sent to the middle of the turntable, and the material is scattered to the periphery under the action of centrifugal force, and falls into the roller path of the grinding ring by the grinding ring, roller grinding, grinding and pulverizing, and the material passes through the layer grinding and then enters the second The layer and the third layer, the suction of the high-pressure centrifugal fan draws the outside air into the machine, and the coarse powder after the third layer is brought into the classifier, and there is no bolt, bearing and oil seal inside the main body. There is less chance of contacting the material with the medium.
  
   
  The eddy current generated by the rotating turbine in the classifier causes the coarse-grained material to fall back to the re-grinding. The fine powder will be discharged with the cyclone dust collector and discharged from the lower discharge valve. The assembly of the end meets the international pulse dust removal. The environment is free from pollution and the environment is clean.
   
  HGM series calcium carbonate grinding mill has less investment than airflow mill under the same fineness, low cost, short recovery period and high powder extraction efficiency. Compared with airflow mill and agitating mill, the output is up to 45%. Above, the wearing parts are low in loss, and all the wearing parts are made of high-quality wear-resistant materials at home and abroad, which is longer than the wearing parts of ordinary grinding equipment, and can generally be as long as more than one year. The operation inside the grinding chamber is safe and reliable. Compared with the ordinary mill, the HGM calcium carbonate mill has no rolling bearing and no screw in the grinding chamber, so there is no problem that the bearing and other seals are vulnerable, and the problem that the screw is loose and the machine is destroyed is avoided. Low consumable loss. All the wearing parts of calcium carbonate mill are made of high quality wear-resistant materials at home and abroad, which is longer than the wear parts of ordinary mill equipment, and generally can last for more than one year.

Previous：Light calcium carbonate production equipment

Next：Reasons for low output of calcium carbonate grinding mill

Related News

• Merry Christmas 2022!
  
• Happy Dragon Boat Festival!
  
• Happy New Yewar 2022
  
• CLIRIK Machinery wishes you a Merry Christmas!
  
• CLIRIK Wish You Happy International Workers' Day 2021
  
• 800 Mesh Ultrafine Limestone Grinding Mill Production Line
  
• Six factors that determine the capacity of calcium carbonate jaw crusher
  
• 1000 mesh calcium carbonate powder superfine grinding mill
  
• Which grinding equipment is recommended for grinding 1000 mesh limestone?
  
• How many meshes can the limestone mill process?